This neck has a nice grain pattern and is an excellent neck for replacement or new project installations. This neck is not Fender Licensed. (Not required with 1/2 paddle headstock)
We have upgraded this neck:-
• 1. Removed the sharp fret ends and dress.
These WD necks are made by the same company that makes WD’s Fender Licensed necks and they are the same quality and built to the same specs, the only difference is the ½ paddle headstock and they are unfinished. This neck shares heel specs common to USA Fender Stratocaster specs and will function as a drop-in replacement that you can shape yourself or build your own instrument with a custom headstock! The angled side of the headstock is pre-cut with the 6 tuning machine holes pre-drilled to make shaping your own headstock as simple as possible.
The pictures are the actual neck.
Features:
Quality Maple Neck with a Maple Fretboard
C - shape Neck Profile with a modern 12" Radius
22 Medium Frets 6150
1-11/16 Nut Width
8.8mm vintage tuner holes
25 ½” Scale Length
Heel width 2-3/16" (USA Fender Specs)
Unfinished
Double Action Truss Rod adjusting at the Headstock.
This neck may require some minor fret leveling and may need to be fine-tuned to fit your instrument. This is normal and not a defect. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. WD does not sell what is commonly referred to as seconds or blems. Due to the volume of necks that they sell, WD does not hand-select necks based on appearance or weight. WD neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required.
Ships to the Lower 48 States only. (UPS Ground)
