Kluson® 6 In Line Locking Revolution Series H-Mount Tuning Machines with Staggered Posts
The Kluson® Revolution H-Mount 19:1 high ratio tuning machine. A traditional 6 in line footprint with contemporary sealed diecast housing.
These state-of-the-art tuning machines are designed to directly retrofit diecast tuning machines with a hex head (bolt) bushing, traditional Kluson® 6 in line mounting pattern and modern 25/64-inch peghole. The vintage outline, metal oval button and pinstripes pay tribute to Kluson® heritage while the stylized one-piece housing encloses the features that modern guitarist demand. A 19:1 high gear ratio guarantees silky smooth operation and fine-tuning stability with no backlash.
Includes 6 in line tuning machine set for right-handed instruments and all mounting hardware.
Newly upgraded with staggered post heights. Staggered posts negate the need for a traditional string tree. By eliminating the string tree, the break point created on the string before the nut is also removed, increasing string life, resonance, and tuning stability.
- Peg hole size required= 25/64 in. (10mm)
- Gear ratio= 19:1
- Bushing Type= Screw-in Hex Head
- String Post Type= Staggered Kluson SafeTi Post
- String Post Heights=
- (2 Machines) 18mm
- (2 Machines) 19mm
- (2 Machines) 20mm
- String Post Diameter= 6mm
- Locking System= Knob on back of housing
These tuners fit 10mm (25/64”) modern size holes and use Threaded hexagonal head bushings. Please check my last image. If your bushings match the bushings in the bottom half of the picture, these will fit.
They do NOT fit headstocks with the vintage 8.8mm (11/32") tuner hole that use the round press in bushing.
If you are not sure if they will fit, send me a picture of the front and back of your headstock.