This neck has a nice grain pattern and is an excellent neck for replacement or new project installations. This neck is not Fender Licensed. (Not required with 1/2 paddle headstock)
We have upgraded this neck:-
• 1. Dressed the fret ends.
• 2. Supply and install a Graph Tech Nubone Tusq Nut. (We have not glued it in).
• 3. Fretboard Cleaned and Conditioned.
These WD necks are made by the same company that makes WD’s Fender Licensed necks and they are the same quality and built to the same specs, the only difference is the ½ paddle headstock and they are unfinished. This neck shares heel specs common to USA Fender Telecaster specs and will function as a drop-in replacement that you can shape yourself or build your own instrument with a custom headstock! The angled side of the headstock is pre-cut with the 6 tuning machine holes pre-drilled to make shaping your own headstock as simple as possible.
The pictures are from a neck I sold earlier this week.
Features:
Quality Maple Neck with a Rosewood Fretboard
C - shape Neck Profile with a modern 12" Radius
22 Medium Frets 6150
1-11/16 Nut Width
8.8mm vintage tuner holes
25 ½” Scale Length
Heel width 2-3/16" (USA Fender Specs)
Unfinished
Double Action Truss Rod adjusting at the Headstock.
This neck may require some minor fret leveling and may need to be fine-tuned to fit your instrument. This is normal and not a defect.
String height and truss rod adjustment will need to be set, as it is not possible before mounting the neck.
For that reason, although I have installed the nut, I don’t glue them in.
Ships to the Lower 48 States only. (UPS Ground)
