Copyright © 2021 Atlantic Custom Guitars LLC · All Rights reserved
SAVE BIG we do not charge SALES TAX
(does not apply to North Carolina)
Click here for details
4 CTS 550K 9% tolerance Custom Audio Taper Pots Short Split Shaft
These are the highest quality Potentiometers that the CTS Corporation manufacture.
WD® Music Products developed these high-quality potentiometers with CTS® to offer you exceptional performance in electronics for your Epiphone, PRS and other humbucker guitars requiring the shorter 3/8" bushing/shaft length. These are NOT the same CTS pots that other companies stock and sell. These are developed using 9% +/- tolerances and a value at 10% over the standard 500K rating (550K). This ensures you not only optimum performance but guarantees your potentiometers will always be at least the value stated unlike many others using 20% tolerances where you can be over spec but in most cases way under the specifications you need to ensure good tone from your pickups. They added brass components and a high quality long life wiper versus what comes standard on most run of the mill pots to ensure long life, quality and consistent performance.
You are purchasing a set of 4 of the best CTS Pots on the market (They don't get any better than this). Each pot comes with 2 washers and 1 nut
Important Specs and Dimensions:
Tolerance = +/- 9%
Can Size = 15/16 in. radius X 3/8 in. height
Bushing Threads = 3/8-32
Bushing Height = 3/8 in.
Shaft Type - split
Shaft Diameter = .238 in (6.3mm)
Spline Count = 24 (NOT metric)
Shaft Length - 3/8 in.
Hole size requirement = 3/8 in.
Value = 550K Ohms
Set of 4 Premium CTS Short Split Shaft 550k Pots